check if you have gunplay trails on

Is anyone else running into the issue where the trails from the shots of the gauss weapons persist forever?

Tried this mod twice, both times the friendly fire made me uninstall, it's just too much PITA micro for me to deal with.

having same problem as mr-mucho-Bueno with no performance mods. I find that you have to be watching the pawn who fires the gun for it to fire. If your firing and not looking at the pawn then no shot seems to be fired.

They are nice and can handle groups impressively, yet i had to remove them from my asenal, the friendly fire is equallly impressive and require exteme micro management because the moment an enemy flanks you and gets shot at, your whole team ends up with holes. They are really strong with pre prepared killboxes where you funnel attackers into a line but i haven't had a regular fight that didn't end in considerable friendly fire, and i only have 2 rifles.

I encountered the same problem@mr-mucho-Bueno

mr-mucho-Bueno: Can you test this without 'performance' mods, particularly using the new delta ticks? It is quite possible that one of your performance mods is preventing the gun from properly firing.

noticed if colonist are shooting at something far away like with a gauss lance off screen, the projectile instance or bullet doesn't spawn when not looking at colonist shooting the gun, and nothing gets damaged.

Have you tried not shooting at your own colonists?

Friendly fire on these weapons make them a really bad choice in most circumstances. Wish there was a way to configure them for the normal 4-5 squares of safe distance. Right now you hit EVERYTHING in front of you.

Why doesn't weapon damage scale with weapon quality? only accuracy

I found that Rocketman does not compatible with this mod, but since Rocketman doesn't get any update for 1.6, it shouldn't be a problem for now. But if you still want to load it on 1.5 for some reasons (e.g. CE still doesn't support 1.6), you may need to disable Rocketman.
When you load this mod with Rocketman, the game will just display a black screen and doesn't response to any input, then you will get many same errors like below in the player.log

Root level exception in OnGUI(): System.TypeInitializationException: The type initializer for 'RocketMan.GUIFont' threw an exception. ---> System.NullReferenceException: Object reference not set to an instance of an object
[Ref 14F78645] Duplicate stacktrace, see ref for original
--- End of inner exception stack trace ---
[Ref 9F1B6FED] Duplicate stacktrace, see ref for original
(Filename: C:\buildslave\unity\build\Runtime/Export/Debug/Debug.bindings.h Line: 39)

The empire needs to NOT spawn with these it's basically impossible to complete certain quests because they are so horrible for friendly fire.

Thank you, NullDragon. Sadly I'm too dumb to read these logs. I disabled everything Coil-Weapons via cherypicker for now, glad I can just turn off the trails in Gunplay and use coilguns again.
Frankly I wasn't even aware anymore that I had Gunplay.. or what that even does.

Jixxor: This seems to fairly obviously be a problem with Gunplay based on the error log. Further research shows that this is not a recent issue, and it is recommended trails be turned off when using Gunplay with any VE mod(medieval 2 also has the issue it seems). Unlikely to be fixed, especially as the dev does not seem to be active at all.

As mentioned on the other comment, when anyone fires Coilguns, the trails of the projectiles do not disappear until I re-load.
When turning on Devmode when a pawn is firing, the error log throws hundreds of red lines.

https://gist.github.com/HugsLibRecordKeeper/54a0683562ac781795660fa22726c3c4

Does anyone have an idea if this degrades performance? Can I now safely remove the mod, or should I instead just remove the coil guns using CherryPicker so they simply won't show up anymore?
Thanks for anyone who can point me toward a solution.

Anyone have a clue why shooting these coil guns leave a visible trail behind that stays until re-loading?

Also anyone having Friendly fire issues there is only 1 tile safe zone for these weapons compared to the 4 tile for everything else.

I REALLY love these guns. That being said it sucks that the spacer walls were removed in the Spacer furniture 2.0 update. Maybe add the functionality to the armored walls from Furniture - Architect? Or even adding it to the grav ship walls. I tried double walling my ship with grav walls/armored walls but keep scewering people on the inside lol. I also buffed them with +2 dmg, +1 range like the charge rifle got in 1.6, and made them cost plasteel. Makes them feel like amazing alternatives to charge weapons.

Does VFE Spacer even have walls? I sure can't see them.

A small suggestion for Odyssey: Since VFE Spacer reinforced walls are intended to block these shots, what about Odyssey ship walls as well?

It would be cool if like other weapons don't hit allies right next to them as if they're shooting over their shoulders. Because right now they do and i can't fit my melee guys anywhere without getting hit

@CheekiBreeki
If you look at comments below, it may be due to gunplay

having an issue with the bullet trails persisting... very annoying to look at

is there a way to turn off the trails?

is there any gauss shotgun?

your FAQ section states that these weapons can spawn on imperial soldiers from the Royalty DLC. What about the imperial soldiers from the VFE: Royals and VFE: Deserters? will they ever spawn with these weapons?

Woops already fixed it, just read a bit farther down apparently the gun play trails do NOT like the projectiles

@xur im having the same issue i found you can destroy them with debug mode but you need to find the structure they impacted for me this was quite hard as this was in combination with misc training and the Gauss projectile had merged a full 10 blocks of stone deep and wouldn't disappear if there's any help to prevent this it would be nice

@Chaplain: Can confirm. Especially if using with the Warcaskets from VFE:Pirates. Gauss-armed soldiers should ALWAYS be in the front.

Did anyone else encounter an error message "Exception ticking defaultxxxxxx (at (xxx, x, xx)): System.NullReferenceException: Object reference not set to an instance of an object."

When I go to the coordinates, I find some gauss tracers are not disappearing; the only way to clear them is to restart the game. I don't know if it has something to do with VWE coilguns or something else.

Great weapon pack, just be aware these weapons have a very high friendly fire chance. Don't put anyone in front of these guys.

now i am gordon freeman

Coming back to Rimworld after a year or so away. Updating hundreds of mods and what not. Finally checking this mod.

I'm having traumatic flashbacks. A mod that provides extremely powerful weapons, yes. Absolutely. But oh god. Irresponsible use of them? The horror. The horror. The delightful horror.

@Wilihey, you can fix this by turning off trails in the gunplay mod.

Fantastic mod! Endgame S tier weapon that would be overpowered if it didn't shred your own colonists and destroy your own buildings if you're not careful.

the gunplay mod as indicated below was the cause for the coilgun trails not disapearing and tanking the framerate, i can live without that mod for now

Love the mod. I feel like it would make sense to add the armored walls and doors from "Vanilla Furniture Expanded - Architect" to the projectile stoppers though.

love it but will not use it.....

Looks like the patch for Reinforced Walls is trying to patch a bed (Erin_FutonB) from Erin's Japanese Furniture

Thank you for letting me know so soon <3, I didn't even know i had that mod to begin with lol

@Oskar Potocki Thx for the info. It seems that there are more conflicts with Gunplay and other VE Weapon mods. Deactivating "Enabe trails" in Gunplay mod settings fixed the errors and visual bugs for me.

Looks like a conflict with Gunplay.

@Ruby Got the same bug, it even throws an uncountable amount of errors in rimworld debug log, slowing the game down. See HugsLib log here [gist.github.com].

When i use the gauss weaponry the trails it leaves don't fade away, is this a visual bug or do i somehow have a mod conflict that's causing such an odd bug?

Report to CE. We don't handle CE compat.

When I load this mod with combat extended, along with another vanilla weapons expanded mod, laser, the game throws up a bunch of very similar xml errors like this:

XML error: <ImpactGlowMoteDef>Mote_ExplosionFlash</ImpactGlowMoteDef> doesn't correspond to any field in type EffectProjectileExtension. Context: <li Class="ProjectileImpactFX.EffectProjectileExtension"><explosionMote>true</explosionMote><explosionMoteSize>0.25</explosionMoteSize><ImpactMoteDef>Mote_YellowSparkFlash</ImpactMoteDef><ImpactMoteSize>1</ImpactMoteSize><ImpactGlowMoteDef>Mote_ExplosionFlash</ImpactGlowMoteDef><ImpactGlowMoteSize>2.5</ImpactGlowMoteSize></li>

when either mod is loaded with combat extended, alot of <impactmoteexplosion> and similar messages come up

I noticed it said "Shots fired by these weapons cannot penetrate mountains or reinforced walls from Vanilla Furniture Expanded - Spacer." But there isn't reinforced walls in Spacer mod anymore because Oskar you said it was replaced by armored wall from Architect, but I found that armored wall can't stop gauss weapon. Could you change that armored wall can stop the coil shots?

what a quick response, ily <3

New update:

Coilguns now respect Friendly Fire setting in game options.