订阅以下载
ISL - Kaari MK4-HO 1490 Hybrid Tunnel Miner

A large miner designed for tunneling horizontally or vertically either manually or with the PAM autominer script in any environment; atmosphere, space or lunar gravity.

The Kaari MK4 is designed as a more versatile alternative to the Anguilla series, equipped with both atmospheric and hydrogen thrusters, as well as a stone ejection system.

This ship is capable of flying in planetary gravity with full cargo on atmospheric thrust only.
It is also able to escape and re-enter planetary gravity with a full cargo, when using both atmospheric and hydrogen thrusters.

Tools, Scripts & Weapons:
4 gatling guns
6 drills
PAM script
Fancy Status Displays script
Asecnt Cruise Control Script


Power:
10 Large Batteries
28 Small Batteries
3 Large Hydrogen tanks
2 Small Hydrogen tanks
2 Hydrogen Generators
1 Hydrogen Engine

Movement & Control:
1 Cockpit
1 Remote Control
8 Gyroscopes
14 Large Atmospheric Thrusters
63 Small Atmospheric Thrusters
64 Small Hydrogen Thrusters

Cargo Space
1 Large Cargo Container
4 Medium Cargo Containers
2 Small Cargo Containers
4 Connectors
6 Drills

Miscellaneous:
Stone Ejection System - 2 Sorters, 12 Ejectors
1 Ore Detector
1 Sensor (for use with PAM)
4 Spotlights
1 Repair Projector

The Kaari MK4 is pushing the limits of capability for a ship of its cargo capacity and dimension, because of this, the side thrust is somewhat limited, and with a full load the ship is sluggish, with a long braking distance.
Please take this into account when flying or setting up mining jobs.

This ship has an empty mass of 168737 kgs, and can move with a full cargo at a maximum tilt of 90 degrees below horizon in planetary and lunar gravity. It is able to do so using only atmospheric thrust in planetary gravity, although it is easier to control with the hydrogen thrusters assisting.

All Programmable blocks are turned off in this blueprint and all toolbars are the same from the cockpit and remote control.

All ships in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston.


Toolbar 1
1. A Thrusters All On
2. A Thrusters All Off
3. H Thrusters All On
4. H Thrusters All Off
5. Thrusters Braking Off
6. Connector Switch Lock
7. Camera Po
8. Camera Sb
9. Lights On/Off

Toolbar 2
1. Battery Discharge
2. Battery Recharge
3. Camera Front
4. Camera Underside
5. Camera Rear
6. Drill Control
7. Drills On/Off
8. Ore Detector
9. Antenna Broadcast On/off

Toolbar 3
1. PB [PAM] "up"
2. PB [PAM] "down"
3. PB [PAM] "apply"
4. Ejector System On/Off
5. PB [PAM] "Align"
6. PB [PAM] "homepos"
7. Hydrogen Engine On/Off
8. Hydrogen Tanks Stockpile On/Off
9. H2 Generators On/Off

Toolbar 5
1. Decrease Gyro Strength
2. Increase Gyro Strength
3. Gatling Gun Control

Toolbar 6
1. Ascent Cruise Control On/Off
2.
3.
4.
5. Repair Projector On/Off