商店页面
Stellaris
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测

Stellaris

商店页面
Stellaris >  创意工坊 > A-Sartek 的创意工坊 > ! Sartek Economy Master > 讨论
! Sartek Economy Master
描述 讨论5 留言325 改动说明
 此主题已被置顶，因此可能具有重要性
A-Sartek  [开发者] 10 月 24 日 上午 6:12
Building Slot Presets
This is information that is available at "auxiliary - sartekdem/PRESETS/Readme-Presets.txt". Sartek Economy Master adds an extra variable to change city specialization slots separetely from the main zone (government zone). Therefore, if you are looking to get more than 33 buildings (default) you can use the presets located at the folder where the readme is located. Just copy and paste the common folder from your preferred building preset on top of the main common folder.

Note: All presets below have 3 city district specializations available per planet. (Vanilla base game only has two specializations)

#################################
### 33 BUILDINGS PRESET
### Default version
#################################

* 9 Government Zone Building Slots (Main City Zone)
* 3 Buildings per City Specialization (Total of 9)
* 5 Buildings per Rural District (Total of 15 for all 3 Basic Resources)

#################################

#################################
### 69 BUILDINGS PRESET
### Meme in between
#################################

* 12 Government Zone Building Slots (Main City Zone)
* 9 Buildings per City Specialization (Total of 27)
* 10 Buildings per Rural District (Total of 30 for all 3 Basic Resources)

#################################

#################################
### 99 BUILDINGS PRESET
### Fits really nice with UI
#################################

* 9 Government Zone Building Slots (Main City Zone)
* 15 Buildings per City Specialization (Total of 45)
* 15 Buildings per Rural District (Total of 45 for all 3 Basic Resources)

#################################

#################################
### 270 BUILDINGS PRESET
### Bonkers (Current UI Max)
#################################

* 30 Government Zone Building Slots (Main City Zone)
* 30 Buildings per City Specialization (Total of 90)
* 50 Buildings per Rural District (Total of 150 for all 3 Basic Resources)

#################################
最后由 A-Sartek 编辑于; 10 月 26 日 下午 12:04
< >
正在显示第 1 - 10 条，共 10 条留言
DaViper 10 月 26 日 上午 9:57 
Now that's a good start! I'm taking about a week or so off Stellaris waiting for the new updates to settle out a bit + In the middle of a 576 mod War of the Chosen Campaign (heh). But I'll be watching as Stellaris is the yin to my Xcom yang at this point. :steamthumbsup::steamthumbsup::steamthumbsup:
#1
A-Sartek  [开发者] 10 月 26 日 下午 6:49 
引用自 DaViper：
Now that's a good start! I'm taking about a week or so off Stellaris waiting for the new updates to settle out a bit + In the middle of a 576 mod War of the Chosen Campaign (heh). But I'll be watching as Stellaris is the yin to my Xcom yang at this point. :steamthumbsup::steamthumbsup::steamthumbsup:

Sounds like a plan! :crashthumbsup:
#2
DaViper 11 月 13 日 下午 5:23 
This is about as clear as mud. More detail would be nice:
"Therefore, if you are looking to get more than 33 buildings (default) you can use the presets located at the folder where the readme is located. Just copy and paste the common folder from your preferred building preset on top of the main common folder."

The mod folder structure is thus:
287775087/
common
localisation
interface
auxiliary-sartekdem <<<<-----where the readme is located.
gfx
thumbnail.png
descriptor.mod

It sounds like you want to overwrite 'common' with the preset. This just crashes the game.
Inside common somewhere? Sorry, but I'm either brainfarting or doing something incorrectly.
#3
DaViper 11 月 13 日 下午 5:26 
Or..to add on: copy scripted_variables and defines into the common folder overwriting what is there?
#4
DaViper 11 月 13 日 下午 7:09 
After much futzing about (and discovering Aripaio's mod is causing issues), the ONLY difference to the city building slots are 6 in each district and 6 total gov slots.
Even loading the 270 preset, nothing changes.
Your picture shows at least 9 gov buildling slots, and the districts still show 6 each.
So something on my end is probably screwed up.
I've uninstalled/reinstalled the mod and turned off bpvr, and 5 gov slots and 5 each for the districts.
I WISH this platform would allow screen caps. Be easier to show them. If you are on discord let me know. I'm sorta' back for some more Stellaris, but this is driving me bats.:steambored:
#5
A-Sartek  [开发者] 11 月 13 日 下午 7:18 
引用自 DaViper：
It sounds like you want to overwrite 'common' with the preset. This just crashes the game.
Inside common somewhere? Sorry, but I'm either brainfarting or doing something incorrectly.

Don't overwrite the main game common folder, you need to replace the common folder from your preferred preset, to this mod's common folder.

引用自 DaViper：
Or..to add on: copy scripted_variables and defines into the common folder overwriting what is there?

Yes. Overwrite what is there already.


引用自 DaViper：
After much futzing about (and discovering Aripaio's mod is causing issues), the ONLY difference to the city building slots are 6 in each district and 6 total gov slots.
Even loading the 270 preset, nothing changes.
Your picture shows at least 9 gov buildling slots, and the districts still show 6 each.
So something on my end is probably screwed up.
I've uninstalled/reinstalled the mod and turned off bpvr, and 5 gov slots and 5 each for the districts.
I WISH this platform would allow screen caps. Be easier to show them. If you are on discord let me know. I'm sorta' back for some more Stellaris, but this is driving me bats.:steambored:

Each district is scrollable, so the UI still looks like 9 gvmt, 3x3 city spec. and 5 for each rural district but you can scroll to see the other building rows.
#6
DaViper 11 月 15 日 下午 2:33 
And a delay on responding...tyvm sinus infection. :-(

Anyway, I did scroll.
Using BPVR + compat, I did overwrite the settings. I know it is 'working' because 5 gov. slots does become '6' and 6 slots for each of the districts. (33 slot default.)

But..even using the 270 preset only shows the same thing. Something is overriding the slot increase. (Scrolling still shows the same 'default' 6 gov buildings with blank space below. Ditto for the districts.)

Running your mod without BPVR shows only defaults, even doing the presets. (which I expected as you indicated BPVR+compat were needed for 'more' slots to work.

If you need anything from me, just lemme' know, but at the time your mods work great 'default' but the presets overriding the 'common' folder defaults are only giving '6' with BPVR.
#7
A-Sartek  [开发者] 11 月 20 日 上午 10:37 
引用自 DaViper：
And a delay on responding...tyvm sinus infection. :-(

Anyway, I did scroll.
Using BPVR + compat, I did overwrite the settings. I know it is 'working' because 5 gov. slots does become '6' and 6 slots for each of the districts. (33 slot default.)

But..even using the 270 preset only shows the same thing. Something is overriding the slot increase. (Scrolling still shows the same 'default' 6 gov buildings with blank space below. Ditto for the districts.)

Running your mod without BPVR shows only defaults, even doing the presets. (which I expected as you indicated BPVR+compat were needed for 'more' slots to work.

If you need anything from me, just lemme' know, but at the time your mods work great 'default' but the presets overriding the 'common' folder defaults are only giving '6' with BPVR.

I would have to take a look at it, btw sorry for the late response, I've been quite busy lately with IRL stuff.
#8
DaViper 11 月 26 日 下午 5:31 
Not an issue. Since I posted, I've had some health issues (not horrid, but not happy-camper either) that has kept me away as well. I appreciate you checking into it, but I'm a patient sort. :steamsad::steamhappy:
#9
DaViper 11 月 27 日 下午 10:03 
Okay! More testing. Something has changed, but still seeing an issue.
Mod order:
UIOD
WP mods
BPVR More building slots
BPVR Compat patch
!Sartek mods
I am using a 'HAB' origin, so working with those instead of planets primarily. Starting a fresh campaign with the 99 preset. It has a clean look and matches what I was using with UIOD+BPVR+ sub mods. (Specifically with an eye to using Gigastructures later in the game.)

Using your default, 33 slots is working with the proper slot counts.
--------------------------------------
69 preset -showing 71 slots:
12 gov (scroll works!)
spec. avail: 10
Hab district (archive) - 10
Hab district Industry - 9
Industry- 10
Astro M. - 10
Research - 10
----------
99 preset
Gov - 9
Spec. Avail - 15
All other districts 15 each for a total of 99 slots.

I haven't tested the biggest one yet, but the '69' slots has two more than indicated.

This is after the 4.2.2 update (plus the updated mods in the playset)
I did the same procedure as you indicated earlier, and as I documented, but apparently Sakura updated BPVR which MIGHT account for the stuff working now. <shrugs>

I don't know WHY the 69 set is giving more than advertised. So there you go. Any help I can pass on I shall.
This is more than enough to get going with, so if I see 'errors', I'll pass them on.:steamthumbsup:
#10
< >
正在显示第 1 - 10 条，共 10 条留言
每页显示数： 1530 50